HOW TO USE THIS BOOK
Installing too wide a belt can result in serious belt wear and/or breakage
ADJUSTMENT
Belt tension can be checked by pressing on the belt at the center point of its longest straight run. The belt
1
1
should give about
/
−
/
in. If the belt is loose, it will slip. If the belt is too tight it will damage bearings in the
4
2
driven unit. Those units being driven, such as the alternator, power steering pump or compressor, have a bolt
which when loosened allows the unit to move for belt adjustment. Sometimes it is necessary to loosen the
pivot bolt also, to make the adjustment.
ADJUSTMENT
59