HOW TO USE THIS BOOK
LEVEL CHECK
The fluid level in the drive axles should be checked at each oil change. Like the manual transmission which is
available, the rear axle does not have a dipstick to check fluid level. Instead, a filler plug is located in the side
of the housing (or in the side of the cover), at a level just barely above the level to which fluid should fill the
housing. To check the fluid level:
To check the front drive axle fluid level, loosen the fill plug ...
... then remove it. Fluid should trickle out of the hole
If not, add the proper grade of lubricant until it does
126
LEVEL CHECK