Power Entry Step - Fleetwood Bounder 2000 Owner's Manual

til/iNC;
WiTh
YOUR MOTOR HOME
The power entry step is controlled by the ignition switch and
by a switch near the entry door. Power for the entry step is
supplied by the coach battery. The battery must be connected
for the step to operate as described below. The step has a
"last out" feature. With the door closed, the step power
switch OFF, turn the ignition switch ON. The step will
retract. Turn OFF the ignition, open the door and the step
will extend and lock in the OUT position. The step also has
an ignition override feature. If the door is closed (as though
ready to depart) with the step extended, the step will auto-
matically retract when the engine ignition is switched ON.
This prevents driving with the step extended. The switches
operate the step according to the following table.
Ignition
Step Step
Switch Switch
Position!
Position Position Action
OFF ON Step extends and retracts with the opening
and closing of the door.
OFF
OFF
Step is inactive. Will not move regardless of
door movement.
ON ON Step extends and retracts with opening and
closing of door.
ON OFF Step extends and retracts with opening and
closing of door. If step is extended when
ignition is turned ON, step will retract.
POWER
ENTRY
STEP
WARNING
Under certain conditions,
the step may not extend
using the last-out feature.
Always look and be sure
the step is extended
before exiting the motor
home.
WARNING
If door is opened and
closed without allowing
the step to fully extend
and lock in the out posi-
tion, the step will retract
and lock in the up posi-
tion.
BOUNdm DiESEL