Table of Contents
Advertisement
LEVELING SYSTEM
Controls for the leveling system are located in the
driver's compartment. A detailed operating and
maintenance guide is included in your Owner's
Information Package. Read all instructions for
this system carefully before operating the system.
WARNING
!
The leveling system is designed as a leveling system
only. Do not use the system as a jack or with a jack.
Do not attempt to raise the tires off the ground. The
system should be used to raise the recreational vehi-
cle to the lowest level position possible.
For operation of the leveling system the follow-
ing is required:
• Park the RV on level ground
• Ignition on, engine running
• Transmission in park
• Parking brake set to the engaged position
• Battery Voltage must be 13.0 Vdc or
greater
POWER ENTRY STEP
The power entry step is controlled by a magnetic
entry door position switch, the engine ignition
switch and by an override switch located near
the entry door. Power for the entry step is sup-
plied by the chassis battery (or batteries). The
battery system must be connected (battery dis-
connect in the "ON" position) for the entry step
to operate.
The entry step will typically extend and retract
with the opening and closing of the entry door as
controlled by the entry door position switch
(function is automatic). Activating the override
switch will move the entry step to the extended
position, and it will stay there regardless of
whether the door is open or closed. Regardless
of the override switch position, activation of the
ignition key with the entry door closed will
retract the entry step. This helps to prevent inad-
vertently driving off with the entry step
LIVING WITH YOUR MOTOR HOME
(If Equipped)
(If Equipped)
extended. The switches operate the entry step
according to the following table.
WARNING
!
Always look and be sure the step is extended before
entering or exiting the motor home.
WARNING
!
If door is quickly opened and closed without allowing
the step to fully extend and lock in the "OUT" position,
the step will immediately retract and lock in the "UP"
position.
Refer to the power step Owner's Manual in your
Owner's Information Package for details on
maintenance and lubrication.
Ignition
Overdrive
Switch
Switch
Position
Position
OFF
OFF
OFF
ON
ON
ON/OFF
ENTRY AND SCREEN DOORS
The main entry door uses a latching system sim-
ilar to that used in automobiles. It has a second-
ary latch as well as a primary latch. When clos-
ing the door, be sure to close it firmly to engage
the primary latch. This will ensure that the door
is fully closed. When traveling, always lock
the deadbolt.
The screen door may be separated from the main
entry door by depressing the catch or releasing the
magnet.
Step
Position/
Action
Step extends and retracts
with the opening and closing
of the door.
Step stays in the extended
position regardless of door
open or closed position.
Step retracts when the door
is closed.
06-1
Hide quick links:
Advertisement
Table of Contents
