Power, Lighting, And Antennas - Garmin GPS 500 Installation Manual

Hide thumbs Also See for GPS 500:
Table of Contents

Advertisement

4.2

POWER, LIGHTING, AND ANTENNAS

4.2.1
Power, Lighting, and Antennas Function
The section covers the Power Input requirements, Lighting Bus input, and Antenna connections.
4.2.2
Power, Lighting, and Antennas Electrical Characteristics
Aircraft Power
Pin Name
AIRCRAFT POWER 1
AIRCRAFT POWER 1
AIRCRAFT POWER 2*
AIRCRAFT POWER 2*
AIRCRAFT POWER
AIRCRAFT POWER
AIRCRAFT POWER
AIRCRAFT GROUND
AIRCRAFT GROUND
AIRCRAFT GROUND
AIRCRAFT GROUND
AIRCRAFT GROUND
* Applies only to GNS 530 part numbers 011-00550-30, 011-00940-10, 011-00940-11 GNS 530A 011-
00835-10, 011-00864-10, 011-00864-11 and GPS 500 part number 011-00562-10, 011-00863-10, 011-
00863-11. For applications requiring secondary or alternate power bus input.
To operate the GNS 530 P/N 011-00550-00 COM transceiver in a 14-volt aircraft, A 14
to 28 volt converter such as a KGS Electronics models RB-126 or UC-14-28 or
equivalent must be used. The voltage converter should include exactly one short-circuit
protection device on its output, such as a circuit breaker. P5002-11 and P5002-12 supply
power to the COM transmitter. The other power input pins (P5001-19, P5001-20, and
P5006-44) accept 11-33 Vdc. GNS 530 P/N 011-00550-10 and 011-00550-30 accepts
11-33 Vdc on all power inputs. Refer to Figure F-10 on page F-21.
A power connection on P5006-44 is only required if NAV SUPERFLAG or G/S SUPERFLAG is utilized.
The power inputs P5001-19 and P5001-20 provide power for all functions of the 500 Series unit except the
COM transmitter and the NAV & G/S SUPERFLAG outputs.
4.2.2.2 Lighting Bus
Pin Name
LIGHTING BUS HI
LIGHTING BUS LO
The 500 Series unit can be configured to track 28 Vdc, 14 Vdc, 5 Vdc or 5 Vac lighting buses using these
inputs. Alternatively, the 500 Series unit can automatically adjust for ambient lighting conditions based on
the photocell. Refer to section 5.2.6.
4.2.2.3 Antennas
Pin Name
GPS ANTENNA
COM ANTENNA
VOR/LOC ANTENNA
GLIDESLOPE ANTENNA
Page 4-6
Rev Q
Connector
P5001
P5001
P5001
P5001
P5002
P5002
P5006
P5001
P5001
P5002
P5002
P5006
CAUTION
Connector
P5001
P5001
Connector
P5003
P5004
P5005
P5007
500 SERIES INSTALLATION MANUAL
Pin
I/O
19
In
20
In
15
In
72
In
11
In
12
In
44
In
77
--
78
--
21
--
22
--
41
--
Pin
I/O
39
In
40
In
I/O
In
I/O
In
In
190-00181-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gns 530aGns 530Gns taws

Table of Contents