Removing The Battery Pack - HP T2200 XR User Manual

Battery Maintenance

Removing the Battery Pack

To remove the battery pack:
1. Remove the front bezel by depressing the tab located under the front bezel and pulling
from the bottom (1). The LED/control button pedestal remains attached to the UPS.
2. Gain access to the metal battery bracket by swinging the LED/control button pedestal to
the right (2).
Figure 4-2: Removing the front bezel and LED/control button
pedestal
3. Remove the metal battery bracket and set it to the side.
Figure 4-3: Removing the metal battery bracket
4-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1
HP Uninterruptible Power System T2200 XR Models User Guide
2