Front Indicator Lamps; Lamps - Chevrolet 2014 Captiva Owner's Manual

Chevrolet Captiva Owner Manual (GMK-Localizing-GME-7896196) - 2014 -
crc - 11/27/13

Front Indicator Lamps

1. Open the bonnet.
2. Remove the headlamp
assembly.
3. Disconnect the wiring harness
connector from the bulb holder.
4. Rotate the front indicator bulb
holder anti-clockwise.
5. Pull the front indicator bulb
holder out of the lamp housing.
6. Press the bulb inward and rotate
it anti-clockwise to remove it
from the bulb holder.
7. Install a new bulb into the holder
by pressing it in and rotating it
clockwise.
8. Install the holder into the lamp
housing by rotating it clockwise.
9. Reinstall the headlamp
assembly.
Tail lamps, Indicator,
Brake lamps, and
Reversing Lamps
1. Open the tailgate.
2. Remove the both covers.
Black plate (27,1)
Vehicle Care
3. Remove two screws and the
lamp assembly.
4. Remove the bulb holder by
rotating it anti-clockwise.
5. Remove the bulb from the holder
by pressing the bulb and rotating
it anti-clockwise.
6. Insert a correct replacement bulb
into the bulb holder.
7. Replace the bulb holder into the
lamp housing. Twist the bulb
holder clockwise to secure.
8. Replace the lamp housing into
the vehicle using the two screws
removed earlier.
9. Close the tailgate.
Tail lamps and brake
lamps (LED)
Have them inspected and replaced
by a repairer.
10-27