Chevrolet 2014 Captiva Owner's Manual page 311

Chevrolet Captiva Owner Manual (GMK-Localizing-GME-7896196) - 2014 -
crc - 11/27/13
11. Press the on/off button (4) to
turn the tyre sealant and
compressor kit off.
Be careful while handling the
tyre sealant and compressor kit
as it could be warm after
usage.
12. Unplug the power plug (8) from
the accessory power outlet in
the vehicle.
13. Disconnect the air only hose
(6) from the tyre valve stem, by
turning it anti-clockwise, and
replace the tyre valve
stem cap.
14. Replace the air only hose (6)
and the power plug (8) back in
its original location.
15. Place the equipment in the
original storage location in the
vehicle.
The tyre sealant and compressor kit
has an accessory adapter located in
a compartment on the bottom of its
housing that may be used to inflate
air mattresses, balls, etc.
Black plate (49,1)
Vehicle Care
Removal and installation of the
sealant canister
To remove the sealant canister:
1. Unwrap both hoses.
2. Slide the canister away from the
compressor housing.
3. Unscrew the hose connected to
the canister.
4. Replace with a new canister
which is available from your
dealer.
5. Attach the hose to the canister
and tighten.
10-49