Chevrolet 2014 Captiva Owner's Manual page 299

Chevrolet Captiva Owner Manual (GMK-Localizing-GME-7896196) - 2014 -
crc - 11/27/13
Removing the jack and tools
1. Open the tailgate.
2. Pull up the floor cover and locate
the wing-bolt.
3. Remove the wing-bolt from the
jack by rotating it anti-clockwise.
4. Remove the jack and tool bag.
5. Remove the straps holding the
bag containing the tool. Then
remove the wheel wrench and
jack handle from the bag.
Removing the spare tyre
1. Use a flat-blade screwdriver to
pry off the whole cover above
the rear bumper.
2. Use the supplied wheel wrench
to loosen a bolt to fix a
spare tyre.
3. Unhook the cable on the tyre
carrier which is located below
the rear bumper.
4. Remove the spare tyre from the
tyre carrier.
Black plate (37,1)
Vehicle Care
To eliminate the possibility of
the jack and tools rattling while the
car is moving, stow them securely
under the floor covering.
Jack specification
Maximum working load : 900 kg
Warning
We designed the jack for use on
your vehicle only.
Do not use jack provided with
your vehicle on other vehicles.
Never exceed the jack's
maximum permissible load.
Use of this jack on other vehicles
may damage the other vehicles or
your jack and lead to personal
injury.
10-37