Configuring The Homeplug Network - Conrad PL85D User Manual

8 Configuring the HomePlug network

3 Configuring the HomePlug network
To install the configuration software, insert the included CD-ROM in the CD
drive of your computer. If autoplay is installed on your computer, the installa-
tion will start automatically. Otherwise, open the folder with the Windows
Explorer by right-clicking on Start and selecting Explorer from the context
menu. Double-click to start the installation wizard manually.
Upon successful installation, the configuration software can be found under
Start --> All programs --> HomePlug --> HomePlug Configuration Wiz-
ard.
• Scan for local adapter
Please note: You must connect every HomePlug device that you intend to
integrate securely in your network directly to your computer for configuration.
• Assign a network password
The factory default password is "HomePlug". For security reasons, we re-
commend overwriting it and assigning a password of your own.
• Add further adapters
Conrad Powerline Adapter PL85D
After launching the wizard, it initially scans for the local adapter connected
directly to your computer.
In this step, select a network password that will apply to all adapters in your
home network. The password must be used by all devices.
Connect each adapter, which is to be added to your network, to your com-
puter and assign it a password.