Automatic Detergent Dispenser Tray; Fault Diagnosis; Selector Buttons; Eco Button - IFB Elite 5 Kg Operating Manual

AUTOMATIC DETERGENT DISPENSER TRAY

Designed for automatic dispensing of detergent &
additives as required,which avoids manual filling at each
stage. The Detergent Dispenser Tray should be filled (with
detergent and additives) before the start of a programme.
The tray has three chambers.
1. Pre-wash chamber:(Marked-I), to be filled with
detergent in case a pre-wash programme has been
chosen or heavily soiled clothes are being washed.
2. Main wash chamber: (Marked-II), requires detergent
for every wash programme.
3. Fabric conditioner additives chamber: (Marked
to be used for additives only. It should be filled as per
instructions under "Operation". The detergent tray
must be pulled out, filled as required and shut
before the machine is switched on.

SELECTOR BUTTONS

ECO Button

This option is for enviromental friendly and
energy saving operation of washing.
With Eco button pressed, the mechanical
tumbling action during wash is considerably
increased in such a way that at lower
temperature and power consumption the same
quality of wash is achieved as that with high
temperature and less mechanical tumbling
action. Refer 'Programme Selection chart'
In cotton Wash Programme the Eco button gives
more vigorous wash action when pressed and
gentle wash action when released.
In EASY CARE programme the Eco button gives
medium vigorous wash action when pressed
and gentle wash action when released.
This button is not effective in woollen
programme.
10
WHY DOES IT HAPPEN?
II
I
),

FAULT DIAGNOSIS

INDICATOR LAMP DOES NOT GLOW.
Check if the machine is ON.
Check for loose connections in plug/socket.
WATER DOES NOT ENTER MACHINE/DETERGENT NOT
BEING FLUSHED INTO DRUM.
Check water supply
Porthole door not firmly closed
Water tap not turned on
Bent inlet hose
Sieve on inlet valve clogged
SUDS ESCAPING FROM DETERGENT DISPENSER TRAY.
Detergent used is not a front loading washing machine detergent
Excessive detergent used
WATER LEAKAGE FROM THE MACHINE.
Inlet/Outlet hose connection loose
Coin trap cover or drain plug not screwed on properly
Inlet hose leaking
MACHINE DOES NOT DRAIN.
Outlet hose end above 1 mtr. from floor level
MACHINE VIBRATES STRONGLY DURING SPINNING.
Machine not levelled properly
Clothes not loaded as instructed
MACHINE DOES NOT START.
Check position of programme selector knob
Check water supply
Porthole door not closed properly
Indicator lamp not glowing
MACHINE DOES NOT SPIN.
Check if the No Spin button is pressed.
water not drained out completely
26