For Netware 5.X/6 Novell Distributed Print Service (Ndps) - Konica Minolta bizhub C550 User Manual

Setting up network printing
11
Use the NetWare server console to load MONITOR.NLM.
12
Select the connection information and, in the active connection col-
umn, check that the created PServer is connected.
Reminder
When turning the power off, then on again, wait at least 10 seconds be-
fore turning the power on again; otherwise, this machine may not function
properly.

For NetWare 5.x/6 Novell Distributed Print Service (NDPS)

Note
Before specifying settings for NDPS, check that the NDPS broker and
NDPS manager have been created and loaded.
Also, before performing the following procedure, check that the TCP/IP
protocol has been set in the NetWare server, and check that the IP ad-
dress has been set for this machine and that this machine is on.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Right-click the organization or organizational unit container where you
will create the printer agent, and then click "NDPS Printer" on the "Cre-
ate" sub-menu.
4
In the "NDPS Printer Name" box, enter the printer name.
5
In the "Printer Agent Source" column, select "Create a New Printer
Agent", and then click the [Create] button.
6
Check the printer agent name, and then in the "NDPS Manager Name"
box, browse through the NDPS manager names, and register one.
7
In "Gateway Types", select "Novell Printer Gateway", and then register
it.
8
In the Configure Novell PDS for Printer Agent window, select "(None)"
for the printer type and "Novell Port Handler" for the port handler type,
and then register the settings.
C550
3
3-36