Assembly Selection - Kingtec K35A Installation Manual

1). The maintenance will be made by the manufacturer within the
guarantee.
2). The manufacture will not take the expense on the delivery charge due
to the maintenance. .
The Certificate Guarantee must be filled completely and send back to
manufacturer for registration. See the Appendix 1 attached.

4. Assembly Selection

1). Selection:
K35A is suitable installed on trailing car or van. The written approval
must be provided by technical department if mounting the assembly on the
MUT or industrial vehicles to ensure the guarantee.
2). Heating (Refrigerating):
The capability of heating and refrigerating of the van depends on:
 The dimension of the van
 The thickness of the wall and isolation
 The size of the van windows and types
The recommend length of K35A is 7 meters, with enough wall thickness
and isolation layer no less than 25mm (foam or wool). The windows must
have anti-explosion film or curtain.
Use the best isolation material and double layer windows since the van is
6