Font Panel Commands; Maintenance - Kingtec K35A Installation Manual

6.Font panel commands

By pushing and releasing this button ,The unit power "on" or "off"
1)
M
2) By pushing and releasing this button,Select the Function mode
3)
4) By pushing and releasing this button, Set the fan speed
NOTE：
The fault code is displayed for failed programming,In this case,you need check the
unit
ALARM SIGNALLING
Mess.
E1
E2
E3

7 .Maintenance

1). Interior air return filter
Clean the air return filter periodically. Generally speaking, the air return
filter will be cleaned once a month. It will be cleaner once a week if it
works in a dirty condition. The air return filter is visible. For example,
the dark appearance shows the filter is clean, while the gray
By pushing and releasing this button,Set indoor temp.
Cause
Room probe failure
Evaporator probe failure
High press.compr. alarm
13