Operation - Dimplex DWF120330B Owner's Manual

Operation

Figure 8
The unit can be controlled by
either the manual controls which
are located on the right side of the
fireplace or the remote (Figure 8
& 9).
The fireplace is supplied with an
IR multifunction remote control.
! NOTE: To operate correctly,
the remote control must be
pointed towards the front of the
unit.
A. Standby
Turns the unit On and Off.
→ Activated by pressing the
Standby button on the remote or
the unit.
• The unit will turn on with the
same functions that it was set
to when it was turned Off and
A B C F
C
On Screen Display
Figure 9
A
D
F
B
the intake temperature will be
indicated on the On Screen
Display.
! NOTE: When any button is
pressed the intake tempera-
ture will be displayed on the On
Screen Display for 5 seconds.
B. Flame Effects
The Flames can be turned off by
pressing the
to turn back on.
→ Activated by pressing the
button on the remote or the unit.
C. Heat ON/OFF
Turns the heater function On
and Off based on the thermostat
setpoint.
→ Activated by pressing the
button, then again
E
F
C
11