Built-in 30”/36”w. all refrigerator/all freezer (7 pages)
Summary of Contents for Viking DFBB363
Page 1
Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com Custom Front Models All Refrigerator/Freezer/Side-by-Side/Bottom Mount F20418B EN (060508J)
Table of Contents IMPORTANT– Please Read and Follow • Make sure that incoming voltage is the same Your safety and the safety of others is Warnings and Important Information as unit rating. An electric rating plate very important. Bottom Mount specifying voltage, frequency, wattage, Dimensions (36”) We have provided many important safety...
Specifications (Bottom Mount) (Bottom Mount) 36” Bottom Mount 36” Bottom Mount Description DFBB363 Overall width 36” (91.5 cm) Overall height (from bottom) 82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max. To front edge of side trim: 23-13/16” (60.5 cm)
Overlay Dimensions Custom Grille Dimensions (Bottom Mount) (Bottom Mount) 36” Custom Panels 36” Custom Grille 1 / 2 ” ( 1 . 2 3 / 4 For Models made ” ” ( 1 . 9 2 - 3 d i u d i u d i u before 9/22/06...
Dimensions Specifications (Side-By-Side) (Side-By-Side) 42” Side-By-Side 48” Side-By-Side Description DFSB423 DFSB423D Overall width 42” (106.7 cm) Overall height (from bottom) 82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max. To front edge of side trim: 23-13/16” (60.5 cm) Overall depth (from rear) To front of top grille: 24-3/4”...
Cutout Dimensions Anti-Tip Dimensions (All Refrigerator/Freezer) (All Refrigerator/Freezer) Dual 30” and 36” All Refrigerator/Freezer Dual 30” and 36” All Refrigerator/Freezer Electric outlet location 6 ” (1 5 .2 c m ) Anti-tip location 9 ” 9 ” (2 2 .9 (2 2 .9 c m ) c m )
Cabinet Information Cabinet Information Full overlay models, (with 3/4” [1.9 cm], thick panels and custom handles locally supplied), fit flush in 25” Full overlay models can be installed in standard 24” (61.0 cm) deep openings. However, the door faces (63.5 cm) deep (countertop depth) cabinet openings with no protrusion into room except custom handles and top ventilation grille will protrude 3/4”...
Custom Side Panel Dimensions Custom Panel General Information Custom finishing options • All installations must allow for the refrigerator ad freezer door to open a minimum of 90˚. 1” Z-Bracket (2.5 cm) • For side wall or corner installation, allow for a standard 3” (7.6 cm) cabinet filler to assure 1/4”...
Custom Door Panel Installation (Refrigerator or Freezer) Remove handle side cabinet screws and trim Remove handle side door trim screws and panel Remove two additional screws under top Remove mounting support. with a phillips screwdriver. with a phillips screwdriver. section of bezel. 1/4”...
Ice and Water Dispenser Bezel Installation (if required) Insert handle-side door trim making sure to engage Reinstall cabinet trim and screws. Install custom wood panels per product’s installation Locate opening in door and position bezel. handle-side “Z” bracket in door trim. Install door trim screws. instructions.
Custom Grille Installation Remove air grille center blade. Remove two 1/4” (.6 cm) screws with a magnetic Install two 1/4” (.6 cm) screws with a magnetic Install custom air grille center blade. extended screwdriver at least 8” (20.3 cm) long. extended screwdriver at least 8”...
35˚ F (1.7˚ C). Before attaching copper DO NOT ground to a gas line. Check with a • The installation of Viking units with a • Remove anything attached to rear or side tubing to the unit, flush at least 2 quarts...
Installation General Information • Most of the unit’s weight is at the top. TIP OVER HAZARD Extra care is needed when moving the unit Appliance is top heavy and tips easily when to prevent tipping. not completely installed. Keep doors closed until appliance is completely installed and •...
Hinge Adjustment Front of unit Place unit within 3” of being flush with cabinets. Carefully move unit until semi flush with cabinet Remove four side screws and remove unit top. Loosen the four hinge screws. Adjust door. Note: To avoid cabinet damage, place cardboard (depending on unit).
Door Stop Adjustment (Side-by-Side) 90˚ Screw 110˚ Wall 120˚ 2 x 4 Refrigerator Open refrigerator door so door stop and shoulder Remove shoulder screw and place in 90˚ or Lift unit off rollers to desired height and level unit using Attach positive secure self-tapping bolts to 2x4 screw are accessible.
Water Filter Installation (Side-by-Side with Dispenser) Water Filter System Specification and Performance Data Sheet This system has been tested according to NSF/ANSI 42/53 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration of less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42/53.* (100% safety factors built- in for unmetered usage for health claims only.) Standard No.
Final Installation Performance Checklist Replace top air grille. Using an 8” magnetic nut driver, replace the two 1/4” screws. (Professional) Replace the center grille louver. (Designer) Replace the center grille louver. h Verify cabinet size. h Align/square door(s). h Verify electrical supply and water supply h Verify drain pan is properly installed and (if applicable).
Service & Registration Service & Parts Only authorized replacement parts may be used in performing service on the appliance. Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.