Before Using The Watch; Reference Position Verification - Campanola 776 Instruction Manual

4. Before Using the Watch

- Reference position verification -

Before the use of the watch, you should perform the following procedure to verify that the
reference position is properly set for each hand of the watch.
If the reference positions are not correctly set, the calendar feature does not properly work.
Year 2000
Sunday
(C)
Verifying the reference position
December
1) With the crown placed in the normal position,
hold down button (C) for about 2 seconds. The
year, month, date, and day-of-the-week hands
then quickly move to their reference positions.
2) Verify that the hands are placed in the reference
positions (Sunday, December 31, 2000).
3)
Return to the present calendar display mode by
pressing button (C) or allowing the reference
position verification state to prevail for about 30
seconds.
* If the hands are not placed in the reference
positions, correct their reference positions as
31st day
directed in Section 9, Adjusting the Reference
Positions.
107