Troubleshooting - Campanola 776 Instruction Manual

8. Troubleshooting

The date hand is moving backward
• This indicates that the Reference Position Failure Alarm has been activated as a result
of not setting the reference position. Perform the All-Reset and Reference Position
Setting procedures by referring to "4. Setting the Reference Position".
The hands do not indicate the correct positions in each mode
• The hand reference positions may shift if the watch is subjected to a strong impact and
so forth. Perform the All-Reset and Reference Position Setting procedures by referring
to "4. Setting the Reference Position".
Abnormal display or operation
• There may be extremely rare occasions on which the watch exhibits an abnormal
display or operation (such as the hands continually turning) as a result of the effects of
static electricity or strong impact. When this happens, perform the All-Reset and
Reference Position Setting procedures by referring to "4. Setting the Reference
Position".
(in 1 second intervals)
97