Continuous Advance Bracketing; Single Frame Advance Bracketing; Flash Notes; Bracketing With The Exposure-Compensation Button - Minolta DYNAX 3 Instruction Manual

EXPOSURE BRACKETING

Continuous Advance Bracketing

To make an automatic three-frame bracket. The drive mode is automati-
cally set to continuous advance when bracketing is selected.
1
• Three frames will be taken. Do not
• If the shutter button is released before
• Exposure is locked with the first frame

Single Frame Advance Bracketing

To take each picture of the three-frame bracket individually, set the drive
mode to single frame advance.
1
2
Press the shutter button all the
way down to take each bracket.
• The shutter-release button must be pressed
for each bracket.
• To cancel the bracketing series, turn the
camera off.
• Exposure is locked with the first frame of
the series.
•
panel to indicate the bracket frame.
86
Hold the shutter-release
button all the way down to
make the bracket.
release the shutter button until all
three exposures are made.
the three exposures are made, the
current bracket will be canceled.
of the series.
Press the drive-mode button
until appears on the
data panel.
• will appear on the data panel
after pressing the shutter-release
button partway down to indicate the
first bracket.
and will appear on the data

Flash Notes

• The built-in flash is set to flash cancel
• An attached Minolta accessory flash will be turned off when bracketing is
selected.
Canceling Bracketing
1
2
•

Bracketing with the Exposure-compensation Button

This function is a shortcut to take a three-frame bracket in increments of
0.5 Ev.
While pressing the exposure-
compensation button, press and
hold the shutter-release button
all the way down.
• The camera automatically exposes a
Exposure-
• Releasing the shutter-release button
compensation
button
when bracketing is selected.
Turn the function dial to
Press the function button and
turn the control dial until
appears on the data panel.
Sliding the main switch to OFF in the
middle of a bracketing series resets the
bracketing series to the first frame
( ).
three-frame bracketed series.
before the series is complete, cancels
the exposure series.
87
.