Table of Contents
Advertisement
CardBus/PCMCIA Driver installation
(Windows XP PCMCIA Installation Guide)
1. Make sure that all cables are properly connected and the drive has
power.
2. If you are using the Saturn Cipher ExDrives, make sure that the
power brick has a steady green light.
3. Boot your computer to Windows.
4. Plug in the Cardbus/PCMCIA cable to the Computer's PCMCIA
Socket/Port then insert the card to the Computer.
5. Windows should now find a new hardware and ask for the driver
location.
6.
Follow the Wizard. Click next to Continue
7.
Follow wizard and point to the location of the driver. (Follow the
steps from the Driver Disc to where you saved the driver files)
example browses to your floppy drive and go to the A:\Win2kXp
folder.
8. Click the second radio button or select the ADVANCED button then
Click Next.
9. Select the "Search for best driver in this location". Check the
"include this Location in the search" option only then click Browse.
10. Browse to your floppy drive and go to the A:\Win2kXp folder.
11. Select the WinXP driver then click OK, Click next to continue.
12. Click the "Continue Anyway" to proceed.
13. Let the OS install the Driver and that's it. Click Finish.
Click YES to restart the Computer if prompted and that's it.
Addonics Technologies
.
Saturn Cipher ExDrive User Guide
16
Advertisement
Table of Contents
