14 | Operation with flap open
5.3
Constant room temperature
Leave the operating mode selector
set to auto as much as possible.
Only that way can you enjoy the full
comfort of the heating program.
However, if you want to specify a constant room
temperature for a longer period, you can select
so-called constant operation with the operating
mode selector.
The following constant room temperature
settings are possible:
: Comfort in constant operation
•
The controller regulates constantly to the
room temperature (high) set for operating
mode Comfort. Factory setting: 21 °C
: Economy in constant operation
•
The controller regulates constantly to the
room temperature (average) set for operating
mode Economy. Factory setting: 15 °C
: Frost protection in constant operation
•
The controller regulates constantly to the
room temperature (low) set for operating
mode Frost. Factory setting: 5 °C. The lead
room is protected against frost if the heating
system is switched on at the heating
appliance. Observe the further information in
the heating appliance operating instructions.
NOTICE: Check the suitability of a
low room temperature for plants
and pets.
B Open flap.
B Turn the operating mode selector to the
required position.
6 720 800 818 (2012/02)
You can change the set
temperature with the rotary
selector (
Chapter 4.2). Turning
the operating mode selector
cancels the modified temperature
again.