Table of Contents
Advertisement
A. Spare Tire/Flat Tire (Valve Stem
Pointed Down)
B. Hoist Assembly
C. Hoist Cable
D. Tire/Wheel Retainer
E. Hoist Shaft
F.
Hoist End of Extension Tool
G. Hoist Shaft Access Hole
H. Wheel Wrench
I.
Jack Handle Extension(s)
J.
Spare Tire Lock
1. Put the tire on the ground at the
rear of the vehicle with the valve
stem pointed down, and to
the rear.
2. Tilt the tire. Separate the tire/
wheel retainer from the guide
pin. Pull the pin through the
center of the wheel.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
Tilt the retainer down through
the center wheel opening.
3. Assemble the two jack handle
extensions (I) and wheel
wrench (H), as shown.
10-75
Advertisement
Chapters
Table of Contents
