Table of Contents
Advertisement
10-68
Vehicle Care
A. Wheel Blocks
B. Jack Knob
C. Wing Nut
D. Retaining Hook
E. Jack
F. Mounting Bracket
2. Turn the jack knob (B) on the
jack counterclockwise to release
the jack (E) from the mounting
bracket (F).
3. Turn the wing nut (C)
counterclockwise to remove the
wheel blocks (A) attached to the
jack (E). Place the wheel blocks
where needed as indicated in
previously in this section.
The tools for changing a flat tire are
located in the passenger side
top-box storage unit.
To remove the tools:
1. Open the top door on the
passenger side top-box storage
unit. Use the ignition/door key to
unlock it if it is locked. See
Top-Box Storage on page 4 2 for
more information.
2. Remove the black pouch from
the storage box.
I n f o r ma t i o n P r o v i d e d b y :
To access the spare tire:
A. Spare Tire (Valve Stem
Pointed Down)
B. Hoist Assembly
C. Hoist Cable
D. Tire/Wheel Retainer
E. Hoist Shaft
F.
Hoist End of Extension Tool
G. Hoist Shaft Access Hole
H. Wheel Wrench
I.
Jack Handle Extension(s)
J.
Spare Tire Lock
Advertisement
Chapters
Table of Contents
