Pictbridge - Konica Minolta DiMAGE G530 Instruction Manual

PICTBRIDGE

Confirm the USB-transfer mode option in the setup
menu is set to PictBridge. Connect the camera to a
PictBridge compatible printer using the camera's USB
cable. The larger plug of the cable is connected to the
printer. Insert the smaller plug of the cable into the
camera; the camera turns on automatically and starts
the PictBridge connection.
Individual still images can be selected for printing on the PictBridge screen. When two
memory cards are in the camera, only the images on the card specified with the memory
priority option on the recording menu (p. 39) can be viewed.
Total number of prints
Number of copies
Image size
Total: 3
:move :sel.
92 U -
SB TRANSFER MODE
2
5M
:print
Use the left/right keys of the controller to display
the image to be printed.
Press the up key to select the number of copies
to be printed. No more than 50 images can be
selected. To deselect an image for printing,
press the down key until the number of copies
reaches zero.
Repeat the previous steps until all the images to
be printed are selected. Press the menu button
to continue.