Manual Exposure - Konica Minolta DiMAGE G530 Instruction Manual

Exposure difference
Exposure display
Press the down key to select between two
apertures; the apertures vary with the zoom
position.
When the shutter-release button is pressed
partway down, the shutter speed used for the
exposure is displayed.
To set other functions with the controller, press
the up key; the aperture value turns gray.

Manual exposure

When the exposure display in the top right corner of the
monitor is gray, the controller can be used to change the
flash mode (p. 28), macro mode (p. 30), and white balance
(p. 46).
To change the exposure, press the up key of the
controller; the exposure display turns white.
Press the down key to select between two
apertures; the apertures vary with the zoom
position. Use the left/right keys of the controller to
set the shutter speed.
When the shutter-release button is pressed
partway down, the difference between the
metered exposure and the set exposure is
displayed in Ev (p. 82). When the difference is
greater than ±2.0Ev, the display turns red.
To set other functions with the controller, press
the up key; the exposure display turns gray.
49