Macro Modes - Konica Minolta DiMAGE G530 Instruction Manual

MACRO MODES

Macro focusing is selected by pressing the
left key of the controller (1). To select Super
Macro, first zoom the lens to the maximum
telephoto position and then select the
appropriate mode with the controller. The
active mode is displayed in the top left
corner of the LCD monitor.
The minimum subject distance changes
with the zoom position of the lens. Super
Macro is only available at the telephoto
position of the lens.
Wide-angle position
5cm (2.0in) -
Super Macro
–
If the subject is outside the flash range (p. 47), overexposure may result. To prevent the
flash from firing, set the flash mode to flash cancel (p. 28).
Always use the monitor to frame the image. The use of a tripod is recommended.
Shooting Tips
Camera shake is more noticeable with long exposures or close-up pictures. In these situations,
place the camera on a tripod and make the exposure with the self-timer (p. 42) to prevent shaking
the camera.
30 R -
ECORDING BASIC OPERATION
Telephoto position
50cm (19.7in) -
20cm - 40cm
(7.9in - 15.7in)
1
Macro
Super macro