Monitor On/Off; Instant Playback - Konica Minolta DiMAGE G530 Instruction Manual

MONITOR ON/OFF

In the recording mode, if the monitor display setting is off; the monitor will briefly turn on
when the camera is turned on. The monitor activates during playback and when using
menus. The monitor can be turned on and off with the set/display button (p. 27).
See navigating the setup menu section on how to open and use the menu (p. 62).
Use the left/right controller keys to select the monitor menu
section.
Use the up/down keys to select the monitor off/on option.
Press the set button to set the initial monitor display on or off;
the menu indicator changes.

INSTANT PLAYBACK

Instant playback displays a still image for approximately three seconds after it has been
recorded. Instant playback can be canceled before the end of the playback period by
pressing the shutter-release button partway down. When using the continuous-shutter
drive mode (p. 40), instant playback activates after each frame. If the monitor is off, it
activates for the instant playback period. See navigating the setup menu section on how
to open and use the menu (p. 62).
Use the left/right controller keys to select the monitor menu
section.
Use the up/down keys to select the instant playback option.
Press the set button to turn instant playback on or off; the menu
indicator changes.
67