Data-Transfer Mode; System Requirements - Konica Minolta DIMAGE DIMAGE-Z5 Instruction Manual

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. Instructions on
using and installing the DiMAGE Viewer software are found in the supplied software
manual. The DiMAGE manuals do not cover the basic operation of computers or their
operating systems; please refer to the manual supplied with your computer.

SYSTEM REQUIREMENTS

For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. Both the
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP home and professional editions
Mac OS 9.0~9.2.2 and Mac OS X 10.1.3~10.1.5, 10.2.1~10.2.8, 10.3~10.3.6
Check the Minolta web site for the latest compatibility information:
North America:
Europe:
Users with Windows 98 or 98 second edition will need to install the driver software on the
included DiMAGE Viewer CD-ROM (p. 105). No special driver software is required for
other Windows or Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the
Windows 98 driver software must repeat the installation procedure. The updated version
of the driver software included on the supplied DiMAGE Viewer CD-ROM is required for
the operation of the DiMAGE Z5 with a computer. The new software will have no affect
on the performance of older DiMAGE cameras.
A remote camera driver is supplied in the Windows edition of the DiMAGE Viewer CD-
ROM. The driver is not compatible with this camera.
102 D -
ATA TRANSFER MODE
http://www.konicaminolta.us/
http://www.konicaminoltasupport.com