Table of Contents
Advertisement
AUTO DSP
Automatic Digital Subject Program Selection can be
temporarily disabled in the auto-recording menu. When
disabled, the program exposure mode is active. If the
camera is turned off, Automatic Digital Subject Program
Selection is activated.
ANTI-SHAKE SYSTEM
The Anti-Shake system minimizes the affect of camera shake, a slight blurring caused by
subtle hand motion. Camera shake is more pronounced at the telephoto setting than at
the wide-angle. Anti-Shake is employed when the shutter speed falls below a certain limit
depending on the focal length in use. The effectiveness of Anti-Shake depends on the
shutter-speed in use and the degree of shaking. The system may not work with moving
subjects or when the camera is panned.
Frame the subject as described in the basic operation section and press the shutter-
release button partway down. Confirm the image has stabilized on the monitor and press
the shutter-release button all the way down to take the picture.
56
A
DVANCED RECORDING
When the system is active, the Anti-Shake
indicator appears. Regardless of the Anti-
Camera-shake
Shake setting, if the shutter speed is too
warning
slow for the camera to be safely handheld,
the camera-shake indicator appears as a
warning. Use the built-in flash or a wide-
Anti-shake
angle zoom position.
indicator
Drive mode
Single
Image size
2560x1920
Quality
Standard
Auto DSP
On
Anti-shake
Disp. + Exp.
Hide quick links:
Advertisement
Table of Contents
