Accessories; Troubleshooting; Saw Chain Sharpening; Oil Level - Black & Decker Saw Manual

On reassembling, the guide bar should be
turned through 180° and the sprocket nose
greased via the sprocket lubrication hole (19).
This ensures an even distribution of wear
around the guide bar rails.
To turn the guide bar through 180°, remove
the small screw from the slider and re-fasten to
the opposite side of the bar.

Saw chain sharpening

If you are to get the best possible performance
from the tool it is important to keep the teeth of
the saw chain sharp. Guidance for this procedure
is found on the sharpener package. For this purpose
we recommend the purchase of the Black & Decker
saw chain sharpening kit (available from
Black & Decker service agents and selected dealers).
Replacing worn out chains
Replacement chains are available through retailers
or Black & Decker service agents. Always use
genuine spare parts.
Saw chain sharpness
The cutters will blunt immediately if they touch the
ground or a nail whilst cutting.
Saw chain tension
Regularly check the chain tension.

TROUBLESHOOTING

If the tool does not operate correctly, check the following.
Fault
Tool will not start.
Tool will not start
button will not slide.
Chain does not stop instantly
when the tool is switched off.
Bar/chain appear hot/smoking.

Oil level

What to do if your chainsaw needs repair
Your chainsaw is in accordance with the relevant
safety requirements. Repairs should only be
carried out by a qualified persons using original
spare parts, otherwise this may result in considerable
danger to the user. We recommend you keep this
user manual in a safe place.
Cat. no.
A6154
A6155
A6156
A6039
A6027
Possible cause
Blown fuse.
Tripped RCD.
Mains lead not connected.
Front guard in the brake position
Chain tension is too slack.
Oil tank empty.
Chain tension is too tight.
Guide bar sprocket nose needs greasing.
Top up if low.

ACCESSORIES

PROTECTING THE ENVIRONMENT

Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
E N G L I S H
Description
300 mm / 12" chain
350 mm / 14" chain
400 mm / 16" chain
Sharpening kit
0.5 l chain oil
Action
Replace fuse.
Check RCD.
Check mains supply.
Reset front guard.
Check chain tension.
Check oil tank level.
Check chain tension.
15