Table of Contents
Advertisement
Tires, Wheels and Loading
To restore the full functionality of the tire pressure monitoring system,
have the damaged road wheel/tire repaired and remounted on your
vehicle. For additional information, refer to Changing tires with TPMS
in this section.
When you believe your system is not operating properly
The main function of the tire pressure monitoring system is to warn you
when your tires need air. It can also warn you in the event the system is
no longer capable of functioning as intended. Please refer to the
following chart for information concerning your tire pressure monitoring
system:
Low tire
Possible cause Customer action required
pressure
warning
light
Solid warning
Tire(s) under-
light
inflated
Spare tire in use Your temporary spare tire is in use.
TPMS malfunc-
tion
190
2011 Milan (mln)
Owners Guide, 1st Printing
USA (fus)
1. Check your tire pressure to ensure
tires are properly inflated; refer to
Inflating your tires in this chapter.
2. After inflating your tires to the
manufacturer's recommended inflation
pressure as shown on the Tire Label
(located on the edge of driver's door
or the B-Pillar), the vehicle must be
driven for at least two minutes over
20 mph (32 km/h) before the light will
turn off.
Repair the damaged road wheel/tire
and reinstall it on the vehicle to re-
store system functionality. For a de-
scription on how the system func-
tions, refer to When your temporary
spare tire is installed in this section.
If your tires are properly inflated and
your spare tire is not in use and the
light remains on, contact your autho-
rized dealer as soon as possible.
Advertisement
Table of Contents
