Loewe Xelos 40 Media Operating Instructions Manual page 84

Digital Recorder
Setting the pre-record and post-record time
You can set a pre-record and post-record time for timer recordings made
without auto time control (DVB) (see also page 103). This minimizes
the risk that a part of the broadcast is not recorded due to the broadcast
starting earlier and/or finishing later.
MENU: Call TV menu.
Choose Recording,
switch to the menu line below.
PRE-RECORD TIME
If you record a programme without VPS, you can enter a time span here
specifying how long before the scheduled time your programmed recording
should start so that programmes which begin too early are recorded
in full.
TV MENU
Recording
list Pre-record time
00 min (0 - 15)
Set pre-record or post-record time,
switch to the menu line below.
Enter the time using the numeric buttons (always 2-digit:
01 to 15 mins for pre-record time; 01 to 60 mins for
post-record time). Factory setting: pre-record: 00 min,
post-record: 05 min.
- 84
Post-record time Recording wizard
DR+ Streaming settings
DR+ STREAMING SETTINGS
Using the DR archives of other TVs
DR device group name
IP port number
Using the DR Setting yes enables you, via the archive, to also view
archives of recordings from other TV sets that have accessible films
other TVs within the home network (client function).
DR device Give a name for your TV set group.
group name Using different group names enables you to group your
TV sets as required. Only TV sets under the same group
name can exchange data.
IP port IP port numbers are preset ex-factory. Under normal
number circumstances they do not require amending.
yes no
Home
17123