Loewe Xelos 40 Media Operating Instructions Manual page 33

Daily operation
Explanations of the sound settings:
more ...
Loudspeaker/ For analogue stations: In the case of programmes with
Headphone twin sound, you can select separately between Mono/
sound Stereo or Sound 1 or Sound 2 for the loudspeakers and
the headphones.
For DVB channels: You can choose here if you wish to
listen to a special soundtrack for the visually impaired over
the speakers. This soundtrack uses an audio commentary
to describe the action taking place on-screen.
The menu item only appears if an audio commentary is
offered by the current channel.
Auto Volume Reduces volume differences, e.g. for advertisements that
are too loud.
AV output You can indicate here which sound is output via the AV
signal socket for dual sound programmes: Sound 1 (e.g. main
language), sound 2 (e.g. foreign language), or sound 1+2
(both simultaneously).
Maximum Determining the maximum volume that can be set.
volume
max. switch on Specify the volume that is set when switching on the TV
volume set with the mains switch.
If the volume is higher when switching the TV set to the
standby mode than specified here, then it is reduced
automatically to the fixed maximum switching on volume
when it is turned on again.
The volume can differ according to the individual stations.
Volume
If the sound is too loud or too quiet in relation to other
adjustment for
stations, adjust the volume. When the menu is open, you
current station
can select the stations one after another with P+/P– and
adjust every single station conveniently.
Balance Set stereo balance so that the volume impression is identical
on the left and right.
If the automatic speech detection is activated, the sound
Auto speech
of the current programme is automatically output with
detection
optimum comprehensibility when speech is detected.
33 -