Call Handling; Call Transfer: Sending A Call To A Different Destination; Call Hold: Placing A Call In A Waiting State - LG-Nortel iPECS LIP-8004D User Manual

LIP-8004D User Guide

4. Call Handling

To Transfer an active call:
•
Press
•
Call the transfer party,
•
Unscreened Call Transfer - Hang-up,
OR
•
Screened Call Transfer - When call is answered or Splash tone
is heard, announce the call and then hang-up.

4.2 Call Hold: Placing a call in a waiting state

3. Call Handling

4.1 Call Transfer: Sending a call to a different destination

You can send an active call to another station or other
resource of the system, using Call Transfer. You can
screen the transfer with the receiving party (Screened
Call Transfer) or complete the transfer without
screening (Unscreened Call Transfer).
Transferred calls, internal or external, are placed in
Transfer Hold. These calls will receive Music on Hold
(MOH) and will recall if not answered in a timely manner.
If an Unscreened Transfer call encounters an error or
DND, it may immediately recall at your Station.
DSS/BLF buttons may be used to transfer calls.
/ ,
TRANS PGM
You may place an active Internal or External call in one
of several holding states. In System Hold, other non-
restricted stations may pick-up the call. In Exclusive
Hold, only the holding station may pick-up the call.
The system is assigned a preferred hold type (System
or Exclusive). You may override this Hold Preference
by pressing the
The LEDs for CO/IP line buttons flash at distinctive rates
for the holding station and other iPECS Phone users.
There are also user operations such as pressing a
/ button that will place a call in Automatic Hold.
DSS BLF
Calls will remain in the held state for a period and then
recall the user. This Hold Recall is provided with a
different ring signal. If not answered in a timely manner,
the Attendant will receive Attendant Hold Recall.
/ button twice.
HOLD SAVE
21
Issue 1
August, 2008