Sony DVP-S9000ES Service Manual page 98

Check Items List
2. ROM, Model, Region
(2-2) ROM Revision
(2-3) ROM Check Sum
(2-4) Model Type
(2-5) Region
3. RAM, EEPROM, NFLASH, H2GA
(3-2) RAM write/read
(3-3) EEPROM write/read
(3-4) NAND FLASH write/read
(3-5) H2GA Register
(3-6) H2GA Interrupt
(3-7) H2GA Reset
4. Servo, ARP
(4-2) Servo-DSP Driver Test
(4-3) Servo-DSP Register
(4-4) Servo-DSP Reset
(4-5) ARP Register
(4-6) ARP DRAM
(4-7) ARP Reset
(4-8) ARP Interrupt
5. AV Decoder
(5-2) AVdec Register
(5-3) AVdec DRAM
(5-4) AVdec DREQ
(5-5) AVdec Interrupt
(5-6) AVdec Revision
(5-7) AVdec Reset
6. OSD
(6-2) OSD Register
(6-3) OSD DRAM
(6-4) OSD Download
(6-5) OSD Interrupt
(6-6) OSD Reset
7. FBI, SACD
(7-2) FBI Register & DRAM
(7-3) FBI Interrupt
(7-4) FBI Reset
(7-5) SACD Register & DRAM
8. Video
(8-2) Venc Video Out
(8-3) OSD (check) → Video
(8-4) FBI (check) → Video
(8-5) AVdec_DRAM → Video
(8-6) ARP_DRAM → Video
(8-7) Progre Video Out
(8-8) Composite Out
(8-9) Y/C Out
(8-10) RGB Out
(8-11) Component Out
(8-12) Euro AV Through
9. Audio
(9-2) Analog Out (Dac/Dout)
(9-3) Analog Out (L/R Check)
(9-4) SF 44.1 kHz (16.9344 MHz)
(9-5) SF 48.0 kHz (18.4320 MHz)
Error Codes List
00: Error not detected
30: RAM write/read data discord
31: EEPROM NG
32: Flash memory clear error
33: Flash memory write error
34: Flash memory read data discord
35: H2GA Register
36: H2GA Interrupt
37: H2GA Reset
40: Servo DSP NG
41: ARP register read data discord
42: ARP ←→ RAM data bus error
43: ARP ←→ RAM address bus error
44: ARP RAM read data discord
45: ARP Interrupt NG
46: ARP Reset NG
50: AVD Register NG
51: AVD DRAM NG
52: AVD DRAM_DMA NG
53: AVD Reset NG
60: OSD Register NG
61: OSD DRAM NG
62: OSD Initial NG
63: OSD Interrupt NG
70: FBI Register & DRAM NG
71: FBI Interrupt NG
72: FBI Initial NG
73: SACD Register Error
74: SACD DRAM CHECK Error
80: ARP → 1930 video NG
90: ARP → 1930 audio NG
A0: System call error (function not supported)
A1: System call error (parameter error)
A2: System call error (illegal ID number)
A3: System call error (time out)
A4: NAND Flash faulty blocks exceed 10
F0: Error occurred
F1: User verification NG
F2: Diagnosis cancelled
6-4