Channel Surround Hookups - Sony DVP-S9000ES Service Manual

Required cords
Audio connecting cord (supplied) (1)
White (L) White (L)
Red (R) Red (R)
S video cord (supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
If you have a digital component such as a receiver (amplifier)
with a digital connector, DAT or MD, connect the component via
the DIGITAL OUT OPTICAL or COAXIAL connector using an
optical or coaxial digital connecting cord (not supplied).
Optical digital connecting cord (not supplied) (1)
Coaxial digital (75  ) connecting cord (not supplied) (1)
Notes
• You cannot enjoy a picture with an S video signal if your TV
does not conform to the S video signal. When your TV does
not have an S VIDEO input, connect the component via the
VIDEO INPUT connector using the audio/video connecting
cord (supplied) instead of the S video cord. For details, see
page 12.
Refer to the instructions supplied with your TV.
• You cannot make digital audio recordings of discs recorded in
multi-channel surround format directly using an MD deck or
DAT deck.
• SACD audio signals are not output from the DIGITAL OUT
OPTICAL or COAXIAL connectors.
When you have made the connections using an optical or
coaxial digital connecting cord, do not set "DOLBY
DIGITAL" to "DOLBY DIGITAL," "DTS" to "ON" and "48kHz/
96kHz PCM" to "96kHz/24bit." If you do, a loud noise will
suddenly come out from the speakers, affecting your ears
or causing the speakers to be damaged.
To S VIDEO
input
To S VIDEO
OUT
AUDIO OUT S-LINK DIGITAL OUT
R L CONTROL S IN PCM/DTS/
DOLBY DIGITAL
2
OPTICAL COAXIAL
1
COMPONENT VIDEO OUT
Y P B P R SCAN SELECT
2 2
SELECTABLE
INTERLACE
PROGRESSIVE
1 1
VIDEO S VIDEO
OUT OUT
To DIGITAL OUT To DIGITAL OUT
(OPTICAL) (COAXIAL)
Take off the cap.
To optical To coaxial
digital input
digital
input
DIGITAL TV/LD DVD VIDEO 2 VIDEO 1 MONITOR S-LINK
TV/LD IN CTRL A1
AC-3 RF
DVD IN
S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO
COAX
IN IN OUT IN OUT IN OUT
VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO
DVD IN OPT
AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO
TV/LD IN OPT
IN IN OUT IN OUT IN
L
B
CD IN OPT
AV Receiver R
SIGNAL
MD/DAT IN OPT GND
IN IN IN REC OUT IN REC OUT IN
(Amplifier) with a R
L
MD/DAT OUT OPT
built-in DTS
R
decoder or Dolby
PHONO TUNER CD MD/DAT TAPE
Digital decoder
Center speaker
INPUT
Front speaker
(R)
Subwoofer
(Active type)
Rear speaker (R)
: Signal flow
Setups for the player
Some setup adjustments are necessary for the player
depending on the components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 50.
• To listen to the sound through speakers connected
to a receiver (amplifier) which has a digital
connector and lacks a built-in DTS or Dolby Digital
decoder, or to output the sound to a digital
component such as a DAT or MD deck
Set the "AUDIO SETUP" items in the setup display
(page 60) as shown in the illustration below. These are
the default settings.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
AUDIO FILTER SHARP
DOWNMIX DOLBY SURROUND
Set the
DIGITAL OUT: ON
items as
DOLBY DIGITAL: D-PCM
DTS: OFF shown
48kHz/96kHz PCM: 48kHz/16bit
To set, press , then ENTER .
To quit, press DISPLAY .
Note
When you output the signals which do not reproduce the Dolby
Surround (Pro Logic) effect from the DIGITAL OUT OPTICAL or
COAXIAL connector, set "DOWNMIX" to "NORMAL" in
"AUDIO SETUP" in the setup display (page 60).
TV
S VIDEO IN
SACD/DVD player
To an AC outlet
AC OUTLET
5.1 INPUT PRE OUT
FRONT REAR WOOFER CENTER
FRONT REAR CENTER
L L
R R
WOOFER
SPEAKERS
FRONT A REAR CENTER
+
L R L R L
–
Front speaker
(L)
Rear speaker (L)

5.1 Channel Surround Hookups

With DVDs which contain DTS or Dolby Digital sound,
you can enjoy the surround sound while producing the
effect of being in a movie theater or a concert hall using a
digital component with a built-in DTS or Dolby Digital
decoder (not supplied). The player outputs the surround
sound signals from the DIGITAL OUT OPTICAL and
COAXIAL connectors.
Using a receiver (amplifier) having the OPTICAL or
COAXIAL connector and 6 speakers, you can enjoy even
greater real audio presence in the comfort of your own
home.
Required cords
Optical digital connecting cord* (not supplied) (1)
Coaxial digital (75 Ω) connecting cord* (not supplied) (1)
S video cord (supplied) (1)
* Connect the component via the DIGITAL OUT OPTICAL or
COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied). You do not need to connect
both of these cords. See the figure on the next page.
Do not connect the AC outlet to a switched AC power
supply such as the AC outlet on a receiver (amplifier).
Doing so may cause the Playback Memory, Disc Memo and
menu settings to be cancelled when you turn off the
receiver.
Notes
• Do not connect the power cord to an AC outlet or press the
POWER switch before completing all connections.
• Refer to the instructions supplied with the component to be
connected.
• The cord connectors should be fully inserted into the jacks. A
loose connection may cause hum and noise.
• SACD audio signals are not output from the DIGITAL OUT
OPTICAL or COAXIAL connectors.
13 14
Selecting the Language for the On-Screen Display
You can select the language for the setup display, the
Control Menu display or the messages displayed on the
screen. The default setting is "ENGLISH."
1 2 3
4 5 6
7 8 9
0
DISPLAY
1
When the player is in stop mode, press DISPLAY
and select "SETUP" using M/ m.
The on-screen menu items are different depending on
whether there is a disc in the player or not.
( 1 )
1 2
1 8 ( 3 4 )
C 0 0 : 0 0
SETUP
Selected
Select:
item
2
Press ENTER.
The setup display appears on the TV screen.
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE: AUDIO FOLLOW
To set, press , then
ENTER
To quit, press .
DISPLAY
15
16
1-3
Setups for the player
Some setup adjustments are necessary for the player
depending on the components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 50.
• When you connect an audio component with a built-
in Dolby Digital decoder A
Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and
then set "DOLBY DIGITAL" to "DOLBY DIGITAL" in
the setup display. (page 60, 61)
• When you connect an audio component with a built-
in DTS decoder B
Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and
then set "DTS" to "ON" in the setup display. (page 60,
61)
• When you connect an audio component that accept
the 96kHz/24bit audio signal C
Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and
then set "48kHz/96kHz PCM" to "96kHz/24bit" in the
setup display. (page 60)
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER
DOWNMIX DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
To set, press , then
To quit, press .
DISPLAY
Notes
• When you do not connect an audio component with a
built-in Dolby Digital decoder, do not set "DOLBY DIGITAL"
to "DOLBY DIGITAL."
• When you do not connect an audio component with a
built-in DTS decoder, do not set "DTS" to "ON."
• When you do not connect an audio component that cannot
accept the 96kHz/24bit audio signal, do not set "48kHz/
96kHz PCM" to "96kHz/24bit."
3
Select "LANGUAGE SETUP" using M/ m, and then
press ENTER.
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
To set, press
ENTER
To quit, press
4
Select "OSD" using M/ m, then press , or ENTER.
The languages you can select are displayed.
</M/m/,
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
STOP To set, press , then
DVD To quit, press .
DISPLAY
: 0 0
5
Select the desired language using M/m, then press
ENTER.
CHOIX DE LA LANGUE
ECRANS:
MENU DVD :
ENTER
AUDIO:
SOUS-TITRE:
Pour régler, appuyez sur
. Pour quitter, appuyez sur
ENTER
ENGLISH
ENGLISH
6
ORIGINAL
Press DISPLAY.
The setup display disappears.
7
Press DISPLAY repeatedly to turn off the on-screen
menu.
.
OFF
STANDARD
SHARP
ON
DOLBY DIGITAL
ON
96kHz/24bit
ENTER .
ENGLISH
ENGLISH
ORIGINAL
AUDIO FOLLOW
, then ENTER .
DISPLAY .
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
.
ENTER
FRANÇAIS
ANGLAIS
ORIGINAL
IDEM AUDIO
, puis sur
.
DISPLAY