Table of Contents
Advertisement
Formatting the SD card removes all files on the memory card and
prepares it for use in the camera. It is recommended that the SD card
is formatted in the camera prior to each use.
1. Select FORMAT MEMORY
2. Select YES to format SD card
3. Push OK to proceed with formatting SD card
TEMPERATURE
Allows the user to select either Fahrenheit or Celsius temperature
settings.
1. Select TEMPERATURE
2. Select Fahrenheit or Celsius and push OK to set
DUTY TIME
This feature allows the user to program the camera to turn ON and
OFF at a specified time.
1.
Select DUTY TIME
SET START TIME
o
SET STOP TIME
o
2.
Push LEFT arrow button to return to menu
Note: For 24 hour activity: START: 00:00 and STOP 23:59
TIME LAPSE
This feature allows the camera to take pictures at a pre-set time
interval (10 seconds to 60 minutes) and record or send them over the
network.
1.
Select TIME LAPSE
2.
Select ENABLE to set up time lapse or DISABLE to
cancel time lapse
Set camera START time using arrows and push OK
to set
Set camera STOP time using arrows and push OK to
set
Page | 10
Advertisement
Table of Contents
