Table of Contents
Advertisement
4. Push card again to remove
Note 1: Ensure SD card is NOT in locked position.
Note 2: Format SD card in camera before using each time. This will
create a file on the SD card where the camera will save images to.
Note 3: It is always recommended to test the SD card by taking some
pictures to ensure SD card works properly before leaving camera for
extended periods of time.
WARNING: Make sure camera is OFF when adding or removing SD
memory card
BATTERIES
This camera is designed for Lithium/Alkaline or Nickel Metal-
Hydride (NiMH) batteries.
separately) can be attached to the bottom port of the camera.
1. Insert 12 AA batteries while ensuring polarity (+ -) is
correctly orientated.
Note: 6V or 9V DC power can be used with or without batteries
inserted. External power by-passes the batteries when 6V or 9V
power is connected. Solar panels DO NOT charge batteries directly
located in the camera.
WARNING: Do not use 12V external battery power as camera
damage will occur.
CHECKING BATTERY LEVEL
Battery level can be seen in bottom left corner of viewer screen
TESTING AND WORKING MODES
The camera has two modes: Set Mode and Work Mode.
1.
Turn switch to middle position to access SET mode. The camera
will enter Live Preview Mode automatically. If the camera beeps,
An AC to DC power cord (sold
Page | 4
Advertisement
Table of Contents
