Table of Contents
Advertisement
NOTE: Night image will be black if External is selected without
XtendIR.
1. Select ILLUMINATION
2. Select Internal, External, or Internal + External and
push OK to set
PIR SENSITIVITY
This feature adjusts the PIR motion sensor. Normal will be
used in most settings. If too many false images are occurring,
user
can select Low and
surroundings. User can select High to increase sensitivity.
1.
Select PIR SENSITIVITY
2.
Select High, Normal, or Low
DUTY TIME
This feature allows the user to program the camera to turn ON
and OFF at a specified time.
1.
Select DUTY TIME
2.
Select Enable to turn ON or Disable to turn OFF
SET START TIME
o
SET STOP TIME
o
3.
Push LEFT arrow button to return to menu
Note: For 24 hour activity: START: 00:00 and STOP 23:59
TIME LAPSE
This feature allows the camera to take pictures at a pre-set time
interval (10 seconds to 60 minutes).
1.
Select TIME LAPSE
Page | 9
Set camera START time using arrows and push
OK to set
Set camera STOP time using arrows and push
OK to set
adjust camera
angle and
Hide quick links:
Advertisement
Table of Contents
