Mounting Camera - UWAY Vigilant Hunter VH200HD Instruction Manual

MOUNTING CAMERA:

This camera is designed to use the UWAY Bracket (sold separately)
to obtain maximal mounting versatility. Camera can be securely
locked with cable lock (through camera, bracket, or both) or security
box (with or without bracket).
Camera can be mounted with nylon strap (included) or security box
(sold separately).
It is recommended to mount the camera 3 feet high overlooking
desired area and 20-30 feet away from target area for maximum
sensitivity in most situations.
depending on animal size and environment. PIR motion detection
distance changes based on ambient temperature and setup. Higher
ambient temperatures will reduce PIR motion detection range thereby
requiring camera to be closer to desired location. Mounting camera
too high or angling camera may result in animal or humans going
under or above the PIR motion detection range.
Angle the camera perpendicular to the ground to maximize the IR
lighting potential. Mount at 45º degree angle to trails to maximize
detection angle. Using UWAY Bracket (sold separately) provides
optimal versatility when mounting the camera. UWAY XtendIR (sold
separately) will significantly increase night IR lighting distances out
to 60-100 feet.
GETTING STARTED
SD MEMORY CARD
The camera supports both SD and SDHC memory cards up to 32 GB.
1. Open camera
2. Insert SD card with marked side facing front of camera
3. Push gently until card clicks into place
Page | 3
Adjustments may be required