Sony PMW-350K Operating Instructions Manual page 107

OPERATION
Menu items Sub-item
Marker Safety Zone
Makes settings related
to marker display in the
viewfinder screen.
Safety Area
Aspect Marker
Aspect Select
Aspect Mask
User Box
User Box Width
User Box Height
User Box H Position –479 to 0 to 479
User Box V Position –464 to 0 to 464
Guide Frame
Settings
On/Off
80%/90%/92.5%/95%
Line/Mask/Off
15:9/14:9/13:9/4:3/
1.66:1/1.85:1/2.35:1/
2.4:1
0% to 30% to 90% (10%
step)
On/Off
40 to 500 to 999
70 to 500 to 999
On/Off
Description
Turns the safety zone display on or
off.
Note
When Center Marker, User Box, and
Guide Frame are set to [On], this
setting cannot be turned on.
Selects the safety zone range.
When an aspect marker is to be
displayed, selects the display
method. Select Off if you do not
want to display the marker.
Line: Show as white lines.
Mask: Display by lowering the
video signal level of areas
outside the marker range.
Selects the aspect ratio of the
marker.
When the Aspect Marker setting is
Mask, specifies the video signal
level of areas outside the marker
range as a percentage value relative
to the video signal level of areas
inside the marker range.
Turns the box cursor display on or
off.
Note
When Center Marker, Safety Zone,
and Guide Frame are set to [On],
this setting cannot be turned on.
Specifies the box cursor width
(distance from the center to the left
and right edges).
Specifies the box cursor height
(distance from the center to the top
and bottom edges).
Specifies the horizontal position of
the box cursor center.
Specifies the vertical position of the
box cursor center.
Turns display of the guide frame on
or off.
Note
When Center Marker, Safety Zone,
and User Box are set to [On], this
setting cannot be turned on.
Menu List
107