Sony PMW-350K Operating Instructions Manual page 143

Assignable switch Function
setting
Histogram Turn the histogram display on or off.
Lens Info Switch the depth of field indication between off, displayed
in meters, and displayed in feet.
Zoom Tele/Wide When a lens that supports serial communication is
installed, assign the Zoom Tele function to ASSIGNABLE
4, and assign the Zoom Wide function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
Zoom Wide/Tele When a lens that supports serial communication is
installed, assign the Zoom Wide function to ASSIGNABLE
4, and assign the Zoom Tele function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
Manual Focus Assist Turn the manual focus assist function on or off.
Focus Mag Turn the focus magnification function on or off.
Zebra Turn zebra display on or off.
Lens RET Display return video signals when the optional CBK-CE01
is installed and a camera extension unit is connected.
When a camera extension unit is not connected, function as
follows.
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review
a) Display return video signals when the optional CBK-CE01
Return Video
is installed and a camera extension unit is connected.
Return Video2 For future system extension. Currently not works.
Return Video3 For future system extension. Currently not works.
Return Video4 For future system extension. Currently not works.
Shot Mark1 Write Shot Mark1.
Shot Mark2 Write Shot Mark2.
OK Mark Add or delete an OK mark.
Color Temp SW 3200K Adjust the white balance with a 3200K preset value.
Color Temp SW 4300K Adjust the white balance with a 4300K preset value.
Color Temp SW 5600K Adjust the white balance with a 5600K preset value.
Color Temp SW 6300K Adjust the white balance with a 6300K preset value.
Electrical CC Function that switches the electrical CC filter (3200K/
4300K/5600K/6300K) applied to white balance adjustment
values.
Each press of the switch or button switches in the order
3200Kt4300Kt5600Kt6300K.
These can also be applied from a menu (apply with
Electrical CC<A><B><C><D>).
This function is not available when White Filter >ND Filter
C.Temp in the Maintenance menu is set to On.
If you set ND Filter C.Temp to On after assigning the function,
the assignable switch ceases to function.
(if playback is allowed).
Note
Assigning Functions to Assignable Switches
State when camcorder
is next powered on
Setting retained
Setting retained
—
—
Setting retained
Setting not retained
Setting not retained
—
—
—
—
—
—
—
—
Setting retained
Setting retained
Setting retained
Setting retained
Setting retained
143