Preparing The Audio Input System; Connecting A Microphone To The Mic In Connector - Sony PMW-350K Operating Instructions Manual

Solid-state memory camcorder
Hide thumbs Also See for PMW-350K:
Table of Contents

Advertisement

4
Use manual or power zoom to set the
lens to telephoto.
5
Point the camcorder at the chart by
turning the focus ring and focus on it.
6
Set the zoom ring to wide angle.
7
Turn the F.f or F.B ring until the chart
is in focus, being careful not to disturb
the focus ring.
8
4
7
Repeat steps
to
until the chart stays
in focus all the way from wide angle to
telephoto.
9
Tighten the F.f or F.B ring fixing
screws.
Preparing the Audio
Input System
Connecting a Microphone to the
MIC IN Connector
Attach the supplied microphone to the
microphone holder of the supplied viewfinder.
1
Loosen the screw and open the
microphone holder clamp.
Microphone holder clamp
2
Place the microphone in the
microphone holder.
1 Wind the microphone spacer around
the microphone, while peeling off the
protective sheets on both sides of the
microphone spacer.
2 Place the microphone in the holder so
that “UP” is at the top.
3 Close the microphone holder.
4 Tighten the screw.
Page 43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pmw-350l

Table of Contents