Loading A Planning Metadata File Into Camcorder's Internal Memory - Sony PMW-350K Operating Instructions Manual

Loading a Planning Metadata File
into Camcorder's Internal Memory
To record planning metadata together with
recording clips, you need to load a planning
metadata file into the camcorder's memory before
starting to shoot.
There are two ways to load files.
• Load a file that has been written to the following
directories on an SxS memory card.
Media Directory to which files are
written
SxS memory BPAV/General/Sony/Planning
card
SDHC PRIVATE/SONY/BPAV/General/
Sony/Planning
• When a Wi-Fi connection is made between the
camcorder and a computer, operate the Web
menu built in the camcorder from the computer
to transfer a file.
For details on how to use the Web menu to load a
planning metadata file, refer to the Supplement
supplied in the CD-ROM (labeled "Manuals for
Solid-State Memory Camcorder").
To load a planning metadata file by menu
operation
Do the following procedures with OPERAION
>Planning Metadata in the setup menu.
1
Insert an SxS memory card into the
memory card slot A or B, and set Load/
Slot(A) or Load/Slot(B) to [Execute].
A file list appears.
Note
The file list displays up to 64 files.
Even if the total number of planning metadata files
is 64 or less, all of the planning metadata files may
not appear if the directory where they are located on
the SxS memory card (General/Sony/Planning)
contains 512 or more files.
2
Turn the MENU knob to select a file to
load and press the knob.
To display detailed information in
planning metadata
After loading planning metadata into the
camcorder, you can check the detailed
information that it contains, such as file names,
date and time of creation, and titles.
1
Under OPERATION >Plan.Metadata
>Properties in the setup menu, select
[Execute].
2
Turn the MENU knob to select
[Execute], and then press the knob.
The PLANNING METADATA
PROPERTIES list appears.
The list contains the following information.
Item Information
File Name File name
Assign ID Assign ID
Created Date and time of creation
Modified Date and time of most recent
modification
Modified by Name of person who
modified the file
Title Title1 specified in file (ASCII
format clip name)
Title2 Title2 specified in file (UTF-8
format clip name)
Material Gp Number of clips in material
group a)
Shot Mark0 to Names defined in file for Shot
Shot Mark9 Mark 0 to Shot Mark 9
a) Material group: A group of clips recorded with
the same planning metadata.
You can turn the MENU knob to scroll the
list.
After turning the MENU knob to select an
item, you can press the SET button to display
the selected item only.
To clear the planning metadata loaded
1
Under OPERATION >Plan.Metadata
>Clear in the setup menu, select
[Execute].
2
Turn the MENU knob to select
[Execute], and then press the knob.
Deletion of the file starts.
Planning Metadata Operations
81