Basic Settings - Konica Minolta BIZHUB 164 User Manual

5.2

Basic settings

5.2 Basic settings
Configure the basic settings for making copies.
For details on the basic copy operations, refer to page 3-7.
0 The number of copies can be increased or decreased by one at a time with the + or , key regardless
of the selected menu item.
0 If the [PHOTO] quality setting is selected, the [AUTO] density setting cannot be selected.
0 If the following conditions are met, the other paper tray is automatically selected when a paper tray that
was selected becomes empty while printing copies.
- Install the optional Bypass Tray.
- Load paper of the same size and type to the Tray 1 and Bypass Tray, and ensure the same orientation
of paper.
1
The menu item varies by pressing the Quick Settings key as shown below.
2
Press the * or ) key to change the settings.
No. Name
1 Number of
copies
2 Paper tray
3 Paper size
bizhub 164
Description
Specify the number of copies you desire.
Press the + or , key to change the number of copies by one at a time and the
* or ) key to change the number of copies by ten at a time.
Select the paper tray loaded with the desired paper.
For details on loading paper, refer to page 3-4.
Select the size of the paper loaded in the paper tray.
A3 w, A4 w, A4 v, A5 w, A5 v, B4 w, B5 w, B5 v, FLS w, 8K w, 16K w, 16K v,
11 e 17 w, LGL w, LTR w, LTR v, INV w, INV v, MEM1 w, MEM2 w
MEM1 and MEM2 are custom sizes.
5
5-5