Telephone
wall jack
System telephone
Connection to telephone
Konftel 100/D is connected to the handset connection on a digital
system telephone as shown in the diagram.
Perform connection in the following order:
1. Remove the system telephone connector from the telephone wall
jack.
2. Remove the handset connector from the digital system telephone.
3. Connect the handset to the switch box.
4. Connect the short cable (0.5 m.) between the switch box and the
handset connection on the system telephone.
5. Connect the long cable (1.5 m.) between the switch box and
Konftel 100/D.
6. Connect the system telephone to the telephone wall jack.
7. Connect Konftel 100/D to the mains transformer and insert the
transformer into the mains outlet.
CONNECTION TO TELEPHONE
Telephone handset
Transformer
Switch box
Konftel 100/D
Only Tufvasson type PFLF15 or Dantrafo
DT 14313 mains transformers may be used
with Konftel 100/D.
3
230 V
mains outlet