Advertisement

UNI FLAME AUTOLIFT
UNI-PLAS
50/80 - 60/90/120 Manual
Plasma CUT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UNI-PLAS 50/80 and is the answer not in the manual?

Questions and answers

Summary of Contents for Uni-Mig UNI-PLAS 50/80

  • Page 1 UNI FLAME AUTOLIFT UNI-PLAS 50/80 - 60/90/120 Manual Plasma CUT...
  • Page 2: Table Of Contents

    YEARS Warranty Machine Model Description Part Number TIG Inverter 180P KUMJR180P CONTENTS PAGE No: Safety Main Parameter General Description Controls Part list Maintenance TroubleShooting UNIMIG pursue a policy of continuous research and development, and therefore reserve the right to change the specifications, or design, without prior notice. * 3 year warranty power source.
  • Page 3: Safety

    SAFETY Welding and cutting equipment can be dangerous to both the operator and people in or near the surrounding working area, if the equipment is not correctly operated. Equipment must only be used under the strict and comprehensive observance of all relevant safety regulations. Please read and understand this instruction manual carefully before the installation and use/operation of this equipment.
  • Page 4: Main Parameter

    °...
  • Page 7: Controls

    ϕ ϕ...
  • Page 9: Part List

    ∅ ∅ ∅ Ω μ Ω Ω Ω...
  • Page 10: Maintenance

    MAINTENANCE WARNING: Exposure to extremely dusty, damp, or corrosive air is damaging to the welding machine. In order to prevent any possible failure or fault of this welding equipment, clean the dust at regular intervals with clean and dry compressed air of required pressure.

Table of Contents