Putting the spare wheel* and jack* into
the cargo area
Wheel wrench*.
Jack* and handle, secured with a tension-
ing strap.
The spare wheel is bolted down with the
rim side down using the through-bolt.
Tools - returning into place
Tools and jack* must be returned into place in
the correct manner after use.
•
For cars equipped with spare wheel, the
jack must be cranked so that it fits into the
spare wheel.
•
For cars equipped with emergency punc-
ture repair kit, the jack must be fully
cranked together and returned into the
foam block.
IMPORTANT
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.
First aid*
A case with first aid equipment is located in the
cargo area.
07 Wheels and tyres
Warning triangle* and spare wheel *
*
Option/accessory, for more information, see Introduction.
07
193