Volvo C30 Owner's Manual page 166

Hide thumbs Also See for C30:
Table of Contents

Advertisement

06 Starting and driving
BLIS* – Blind Spot Information System
WARNING
BLIS does not work in sharp bends.
BLIS does not work when the car is revers-
ing.
A wide trailer coupled to the car can conceal
other vehicles in adjacent lanes. It can pre-
vent the vehicle in the screened area from
being detected by BLIS.
Daylight and darkness
In daylight the system reacts to the shape of
the surrounding vehicles. The system is
designed to detect motor vehicles such as
cars, trucks, buses and motorcycles.
In darkness the system reacts to the head-
lamps of surrounding vehicles. Vehicles with
headlamps that are switched off are not
detected by the system. This means for exam-
06
ple that the system does not react to a trailer
without headlamps which is towed behind a
car or truck.
WARNING
The system does not react to cyclists or
moped riders.
The BLIS cameras have limitations similar to
those of the human eye, i.e. they do not see
as well in e.g. heavy snowfall, strong
oncoming light or thick fog.
*
166
Option/accessory, for more information, see Introduction.
Activating/deactivating
Button for Off/On (button location depends on
other selected equipment).
BLIS is activated when the engine is started.
The indicator lamps in the door panels flash
three times when BLIS is activated.
The system can be deactivated/activated by
pressing the BLIS button.
When BLIS is deactivated the light in the button
goes out and a text message is shown on the
dashboard display.
When BLIS is activated the light in the button
illuminates, a new text message is shown on
the display and the indicator lamps in the door
panels flash three times. Press the READ but-
ton to clear the text message. For more infor-
mation on messages, see page 52.
BLIS system message
Text on the dis-
Specification
play
The BLIS system is
BLIS ON
activated.
BLIS REDUCED
Reduced function in
data transmission
FUNCTION
between the BLIS
system's camera
and the car's electri-
cal system.
The camera resets
itself when the data
transmission
between the BLIS
system's camera
and the car's electri-
cal system returns to
normal.
BLIS CAMERA
One or both cam-
BLOCKED
eras blocked - clean
the lenses.

Advertisement

Table of Contents
loading

Table of Contents