not necessary to use a locking clip. The ALR retractor can
be "switched" into a locked mode by pulling all of the
webbing out of the retractor and then letting the webbing
retract back into the retractor. If it is locked, the ALR will
make a clicking noise while the webbing is pulled back
into the retractor. For additional information on ALR,
refer to the "Automatic Locking Mode" description un-
der "Occupant Restraints." The cinching latch plate is
designed to hold the lap portion of the seatbelt tight
when webbing is pulled tight and straight through a
child restraint's belt path. Please see the table below and
the following sections for more information about both
types of seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91
Lap/Shoulder Belt Systems for Installing Child
Restraints in this Vehicle
2